Modeling and simulation of mitigating membrane fouling under a baffle-filled turbulent flow with permeate boundary
发表时间：2019-03-12
点击次数：
- 论文类型：
- 期刊论文
- 第一作者：
- Zhang, Wenjuan
- 通讯作者：
- He, GH (reprint author), Dalian Univ Technol, Res & Dev Ctr Membrane Sci & Technol, State Key Lab Fine Chem, Sch Chem Engn, Dalian 116024, Peoples R China.
- 合写作者：
- Ruan, Xuehua,Ma, Yongliang,Jiang, Xiaobin,Zheng, Wenji,Liu, Yuanfa,He, Gaohong
- 发表时间：
- 2017-05-31
- 发表刊物：
- SEPARATION AND PURIFICATION TECHNOLOGY
- 收录刊物：
- SCIE、EI
- 文献类型：
- J
- 卷号：
- 179
- 页面范围：
- 13-24
- ISSN号：
- 1383-5866
- 关键字：
- Crossflow microfiltration; Membrane fouling; Turbulence promoter; Deposition process; Computational fluid dynamics
- 摘要：
- Mitigating membrane fouling by using turbulence promoters (TP) is an important issue in the microfiltration field. Considering the particles accumulation on the walls of permeable membrane tubes (one kind of fouling mechanism) with TP, we proposed a three-dimensional numerical model for random decision that decides particle movement on the membrane boundary. We investigated and predicted the permeate flux, fouling layer thickness and optimal TP arrangement modes with different operational parameters with this model. The dynamics process of cake deposition was precisely quantified and visualized. And then the simulated results ignored of pore blockage for the permeation flux were deviated less than 10% compared with the experimental data in literatures. After TP condition being optimized, the mass transfer resistance sharply reduced. Average thickness of the cake layer decreased from 0.318 mm to 0.026 mm, and the permeate flux increased more than 60%. (C) 2017 Elsevier B.V. All rights reserved.
- 是否译文：
- 否
