NAV
中文 DALIAN UNIVERSITY OF TECHNOLOGYLogin
Membrane
Paper
Current position: Home >> Research Results >> Paper
Membrane assisted cooling crystallization: Process model, nucleation, metastable zone, and crystal size distribution
Release time:2019-03-13 Hits:
Indexed by: 期刊论文
First Author: Jiang, Xiaobin
Correspondence Author: Jiang, XB; He, GH (reprint author), Dalian Univ Technol, Sch Chem Engn, R&D Ctr Membrane Sci & Technol, State Key Lab Fine Chem, Dalian 116024, Peoples R China.
Co-author: Lu, Dapeng,Xiao, Wu,Ruan, Xuehua,Fang, Jian,He, Gaohong
Date of Publication: 2016-03-01
Journal: AICHE JOURNAL
Included Journals: SCIE、EI、Scopus
Document Type: J
Volume: 62
Issue: 3
Page Number: 829-841
ISSN No.: 0001-1541
Key Words: crystal size distribution; membrane assisted crystallization; metastable zone; nucleation; simulation
Abstract: The membrane assisted cooling crystallization was proposed and investigated by the simulation and experiments. The developed process model concerned the supersaturation evolution on the membrane interface, the combined nucleation rate in the crystallizer. The impact of different membrane on reducing the nucleation barrier was investigated by introducing the metastable zone width theory. The influence of membrane distillation conditions on the crystal nucleation and growth kinetic was uncovered based on the simulation and experiments results. The experimental results indicated that membrane assisted cooling mode with optimized profiles did improve the crystal size distribution and crystal habit comparing with conventional cooling mode. Terminal coefficient of variation decreased from 55.4 to 33.9 under similar mean crystal growth rate, 2.27 x 10(-7) m s(-1) (conventional cooling) and 1.98 x 10(-7) m s(-1) (membrane assisted cooling). Finally, the brief summary on the advantages and key issues of this propose membrane assisted crystallization operation were concluded. (c) 2015 American Institute of Chemical Engineers AIChE J, 62: 829-841, 2016
Translation or Not: no