论文类型：
期刊论文
第一作者：
Sattar, Harse
通讯作者：
Ran, H; Ding, HB (reprint author), Dalian Univ Technol, Sch Phys, Chinese Minist Educ, Key Lab Mat Modificat Laser Ion & Electron Beams, Dalian 116024, Peoples R China.
合写作者：
Ran, Hai,Ding, Wu,Imran, Muhammad,Amir, Muhammad,Ding, Hongbin
发表时间：
2020-01-01
发表刊物：
APPLIED PHYSICS B-LASERS AND OPTICS
收录刊物：
EI、SCIE
文献类型：
J
卷号：
126
期号：
1
页面范围：
5-
ISSN号：
0946-2171
摘要：
Surface hardness and microstructural properties are important parameters of plasma-facing material and play a key role in long pulse operation of fusion reactor. Nowadays, nuclear reactors are facing the problem of change in physical properties especially surface hardness due to dominant extreme conditions. Consequently, it is important to monitor these changes. Laser-induced breakdown spectroscopy (LIBS) has a potential diagnostic ability to monitor in situ surface hardness and their correlation with plasma wall interaction. In this work, the hardness of different tungsten heavy alloy grades is measured by stand-off approach using LIBS. The difference in hardness was attributed to grain size, crystal size, dislocations density and energy band gap (Eg) of materials. These microstructural and electronic structure properties have direct impact on electron temperature in laser-ablated plasma. Plasma electron temperature has been determined using Boltzmann plot method in the range from 1.76 +/- 0.01 to 1.90 +/- 0.02 eV, while electron density has been derived using Stark broadening spectral profile of (W-I) 429.47 nm line. The obtained direct relation between the ionic to atomic species of (WII/WI) and the material hardness are associated to increase in the value of plasma electron temperature (Te). The energy band gap of these tungsten heavy alloy targets has been observed from 3.24 to 3.59 eV as hardness increases from 314 +/- 2.2 to 354 +/- 1.1. The results showed that the energy band gap of these targets increases with hardness and have direct relation with plasma electron temperature. Ablation efficiency was also measured as a function of laser irradiance from crater depth analysis. The results showed that average ablation rate is decreased from soft to hard material.
是否译文：
否
